Contact Phone: +7 831 417 93 90
E-mail: info@graz.aero
5, Delovaya st., Nizhny Novgorod, Russia
En
Made in Vozduh
5, Delovaya st.,
Nizhny Novgorod, Russia
Made in Vozduh
En

Putting an aircraft refueller into operation (first start)

Instruction how to put an aircraft refueller into operation

Before putting an aircraft refueller into operation it is necessary to conduct the following things:

- Lean the manual of an aircraft refueller and its attachments;
- Lean the service book of chassis;
- Reopen an aircraft refueller (in case it was reopened);
- Conduct maintenance of chassis or a tractor;
- Check out the presence of documentation, tools and spare parts;
- Put on record chassis or a tractor to the appropriate authorities;
- Put on record chassis or a tractor to the nearest service center.

After performing the above activities you should coordinate the date of conducting commissioning works and putting an aircraft refueller into operation by a specialist from Grabovo Automobile Plant JSC.

ATTANTION: reopening of the vehicle, tank and filter-water separator cleaning, opening seals on a superstructure and ensuing putting the vehicle into the first operation must be done only in the presence of the representative from Grabovo Automobile Plant JSC. In case of breaching of this provision Automobile Plant JSC has a right to remove this vehicle from the warranty registration.

If there is any problem while an aircraft refueller operating or you need any spare parts for its superstructure, please, immediately contact the warranty and service department of Grabovo Automobile Plant JSC.

If you have any questions or problems concerning chassis or a tractor while its operating you should contact to its service centers. The copy of claim should be sent to the warranty and service department of Grabovo Automobile Plant JSC.