Contact Phone: +7 831 417 93 90
E-mail: info@graz.aero
5, Delovaya st., Nizhny Novgorod, Russia
En
Made in Vozduh
5, Delovaya st.,
Nizhny Novgorod, Russia
Made in Vozduh
En

45 m³

45 m³

The aircraft refueller has been designed for airplanes refueling with filtered aviation fuel both pure and mixed with fuel system icing inhibitor agents. It is in full compliance with allowable loads on thoroughfare. It has a vehicle type approval and a certificate of conformity GOST 52 906-2008.  

The aircraft refueller is used in airports of all the classes at air temperature from -400C to +400C and relative air humidity no more than 95%. 

45 m3 tank capacity
Case shaped cross-section
One compartment
Extensive customization options
High performance

If you need more information about this model, please, fill in the form below.

E-mail
Name
Telephone
Company
CAPTCHA
CAPTCHA
Type the letters you see on the picture*
Close form
Technical parameters
Configuration Standard
Tank capacity
45 000 liters
Tank material
High-strength aluminum alloy

Pump output flow at underwing refueling

via one hose

via two hoses



1 200 l/min
2 400 l/min
Dosing fuel system icing inhibitor agents
0.0%, 0.1+0,05%
Maximum allowable pressure in a dispensing hose before a bottom filling nozzle
4,5 kg/sm2
Nominal filtration rating
1-2 microns
Maximum allowable water content (by weight)

0,003%

Main consumption indicator error
±0,25%
Dispensing hoses (number x length, m x diameter, mm)
2 x 30 x 63
Bottom filling nozzle 
2 x Meggitt F145
Pumping unit
Alfons Haar, FPQ 150
A calculating and metering system
Alfons Haar, МКА 3350 DKP
Filter – water separator
Faset HCS-C-456-244
Refueling hoses
Elaflex, HD-63-C LT
The Inline valve 
Maggitt
A level gauge, a tank filling limiter system
Electronic
An administration panel
Electronic
System of control for operator’s condition (“Dead man”)
Installed
System of blocking rooter’s movement (Interlock)
Installed
System of earthing
Two earthing reels with a 30 meters length cable
Painting
By client’s coloring map including a company logo
Configuration: Standard

Tank capacity:
45 000 liters

Tank material:
High-strength aluminum alloy

Pump output flow at underwing refueling via one hose:
1 200 l/min

Pump output flow at underwing refueling via two hoses:
2 400 l/min

Dosing fuel system icing inhibitor agents:
0.0%, 0.1+0,05%

Maximum allowable pressure in a dispensing hose before a bottom filling nozzle:
4,5 kg/sm2

Nominal filtration rating:
1-2 microns

Maximum allowable water content (by weight):
0,003%

Main consumption indicator error:
±0,25%

Dispensing hoses (number x length, m x diameter, mm):
2 x 30 x 63

Bottom filling nozzle :
2 x Meggitt F145

Pumping unit:
Alfons Haar, FPQ 150

A calculating and metering system:
Alfons Haar, МКА 3350 DKP

Filter – water separator:
Faset HCS-C-456-244

Refueling hoses:
Elaflex, HD-63-C LT

The Inline valve :
Maggitt

A level gauge, a tank filling limiter system:
Electronic

An administration panel:
Electronic

System of control for operator’s condition (“Dead man”):
Installed

System of blocking rooter’s movement (Interlock):
Installed

System of earthing:
Two earthing reels with a 30 meters length cable

Painting:
By client’s coloring map including a company logo

Certificates
Aircraft Refueller 10 - Laureate of the contest "100 best goods of Russia"
Aircraft refueller 10 - Laureate of the regional contest "Best goods and services of the Penza region"
Aircraft Refueller 20 - Laureate of the contest "100 best goods of Russia"
Aircraft refueller 20 - Laureate of the regional contest "Best goods and services of the Penza region"
Aircraft Refueller 30 - Laureate of the contest "100 best goods of Russia"